Concrete / Cement Mixer Truck HOWO 6x4 8cbm 290hp Euro III Standard ZZ1257M3641W

Concrete / Cement Mixer Truck HOWO 6x4 8cbm 290hp Euro III Standard ZZ1257M3641

Specification for HOWO 6x4 Concrete/cement Mixer Truck 8cbm

Features of Sinotruk HOWO 6x4 Concrete/cement Mixer Truck 8cbm:

On the basis of fully digesting and absorbing the advanced manufacturing and technology of domestic and foreign mixer truck manufacturers, it is improved, and after hundreds of tests of feeding and discharging speed, discharging rate, mixing efficiency, twist elasticity, driving performance and other tests, the concrete is developed. The mixing transport vehicle is composed of a car chassis and a concrete mixing transport device.

The tank body and blade of the mixer truck are made of wear-resistant materials and welded well. "People-oriented, sincerity and trustworthiness" is the company's philosophy, and "customer-centric" is the service tenet of the company. The company is strong, the technology is updated quickly, and the after-sales service is good. Various types of concrete mixer trucks and other products have been available since their introduction and at home and abroad. Adhere to the business philosophy of "survival, progress with technology, development, and efficiency", rely on scientific management, process technology, quality products, perfect after-sales service system, develop itself, and quickly win the market.

Introduction in using the concrete mixer truck:

Before loading the concrete mixer truck, drain the water and debris left in the mixer. Keep turning during transportation to prevent segregation of concrete. Before the mixer truck arrives at the construction site and discharges the material, the mixer should be rotated at 14-18 rpm for 1 to 2 minutes at full speed, and then reverse discharge is performed. Before reversing, the mixing drum should be kept stationary.

The temperature inside the tank of the concrete mixer truck is higher than +25 degrees Celsius. The duration from loading, transportation, and unloading shall not exceed 60 minutes, and the ambient temperature shall be lower than +25 degrees Celsius. The above time shall not exceed 90 minutes. During winter construction, it should be practical: check for icing before starting; carefully remove the residual water in the mixing bowl and water supply system after work, turn off the pump switch, and place the control handle in the "stop" position. We can take out the vehicle to find the longest crowbar on the vehicle to measure the water level, and then hold the deepest mark on the crowbar to compare to our vehicle chassis, the same way.

After the mixer truck unloads at the construction site, it should immediately flush the feeding hopper, discharge hopper, discharge chute, etc. with the hoses provided with the mixer truck to remove the sludge and concrete attached to the vehicle body. On the way back to the mixing station, 150-200L of water should be poured into the mixing drum to clean the concrete residues sticking to the drum wall and the blade.

When the concrete mixer truck is working, do not put your hand into the rotating mixing drum. It is strictly forbidden to put your hand into the connection part of the main discharge chute and the extended discharge chute to avoid accidents. The abrasion condition of the stirring blade should be checked regularly and repaired and replaced in time. Driving skills using small concrete mixer trucks over waterlogged roads

Using concrete mixer trucks over driving waterlogged roads, the chassis of the concrete mixer truck is high enough to cope with general rainfall weather, but in the face of heavy rainfall weather In situations, you still need to drive carefully. Various safety practices. The driver of the concrete mixer truck must undergo professional training, and those who do not have a certificate shall not be employed.

cement handling equipment

concrete mixer truck

Concrete / Cement Mixer Truck HOWO 6x4 8cbm 290hp Euro III Standard ZZ1257M3641W Images